Troubleshooting - GE 898694 Manual Del Usuario

ProblEM
Iron does not
heat up.
Water leaks out
of the iron.
Iron does not
produce steam.
898694-Iron-EN+ES-01.indb 12

TROUBLEShOOTING

CAusE
• The power plug (8) is not
connected properly to
the electrical outlet or the
circuit breaker is tripped.
• The temperature setting is
set to off (o).
• The auto shut-off function
has been activated.
• The water tank (15) is
overfilled.
• The set temperature has
not been reached or is too
low.
• Water level in the water
tank (15) is too low.
• The set temperature has
not been reached.
• The function control (4)
is not set to the steam
ironing position.
• Anti-drip function shuts
off steam when the
temperature setting is too
low.
soluTion
• Re-connect the power
plug (8) properly to the
outlet or check the circuit
breaker.
• Set the temperature
control (13) to desired
temperature.
• Tilt the iron back and forth
to restart the iron.
• Pour out some water.
• Allow sufficient time for
the iron to preheat or set
higher temperature.
• Add water in the water
tank (15).
• Allow sufficient time for
the iron to heat up.
• Set the function control (4)
to the steam ironing
position.
• Set temperature higher.
12
3/6/12 4:58 PM