Keypad Lock - Premier TEL-4244IL Manual De Instrucciones

without being heard by your correspondent.
Press the <MUTE> button during a conversation. The microphone will be deactivated. The [
icon appears on the display. Press the <MUTE> key again when you want to continue the
conversation.
4.7 Setting the Volume
During a conversation you can set the volume by pressing the <RECEIVER VOL> key. You can
set the volume alternatively in between (1 to 5) using the <RECEIVER VOL> key.
When you are calling in Handsfree mode and you want to change the volume, press <RECEIVER
VOL> key.
4.8 Setting the Pause
If you wish to insert a pause, press the <PAUSE> key on the location where you want a pause of 3
seconds.
4.9 Flash
When you press the <FLASH> button, also called flash or recall, the unit generates a line
interruption. It gives you the possibility to use the special services of your telephone provider
and/or to transfer calls when you have a telephone exchange.
4.9.1 Setting the Flash time
Press and hold <Last Number Redial> key for 3 seconds
The display will show: [S] or [L]
The flash time setting will disappear after 2 seconds from the display
4.10 Setting the ringer volume and melody
4.10.1 Handset melody
Press and hold the <RINGER TONE> key until the current melody is heard.
Select the desired melody (1 to 9) by means of the scroll keys
Press the <RINGER TONE> key again to confirm the setting
4.10.2 Handset ring volume
Press the <RINGER TONE> key in standby mode
The handset will ring in the current volume
Use the scroll keys to select the desired volume
Press < * > to turn the volume off and the bell off icon [
NOTE: The Hands free receiver volume is also adjustable as above described!
You can turn the ringer volume of each individual handset ON or OFF by simply press and hold < *
> key in standby mode. The handset unit will never ring!

4.11 Keypad Lock

When the keypad is locked, pressing any key will have no effect during standby (except holding the
<# / LOCK> key).
] will be on
]
5