Removing A Handset; Call Transfer And Intercom Between Two Handsets; Call Transfer And Conference Call During An External Call; Internal Call (Intercom) - Premier TEL-4244IL Manual De Instrucciones

base.
When the handset is registered, it will show [HS] followed by the handset number.

6.2 Removing a Handset

You can remove a handset from a base to allow another handset to be registered.
Press and hold <CID/"> key for 3 seconds, then press and hold <DELETE> key for 3 seconds.
Enter the base PIN code (0000). If the PIN is wrong, the handset will go back to standby mode.
Enter the handset number (1 to 4) you want to remove.
The unit will go back to standby if the removal is successfully. If not, it will ask again to enter the
handset number.
NOTE: You can only remove other handset in your system but you are not able to remove the
handset you are using.

6. Call Transfer and Intercom between Two Handsets

7.1 Call Transfer and Conference Call during an External Call

During an external call, press the <INT> button followed by the number (1 to 5) of the other
handset.
The other handset will start to ring:
! When the other handset takes the line you can talk internally.
If you hang up, the external line will be connected with the other handset.
If you press and hold the <INT> button for 3 seconds you can talk with the 2nd handset and
external line at the same time (conference call).
! Or press the <INT> button again to return to the external call.
Press the <TALK> key to end the call.

7.2 Internal Call (Intercom)

In standby press the <INT> button followed by the number (1 to 5) of the other handset.
The other handset will start to ring. You can stop the ringing by pressing the <TALK> key.
If the other handset answers the call by pressing the <TALK> you can talk internally.
Press the <TALK> to end the call.
9