Publicidad
Para ver a lista completa das configurações do BIOS, consulte o Guia de produto no CD-ROM Intel Express Installer ou visite o
site da Intel
http://support.intel.com/support/pt/motherboards/desktop/
Se entra en el programa de configuración del BIOS pulsando la tecla <F2> después de que comience la comprobación automática
de la memoria durante el arranque (POST) y antes de que empiece el arranque del sistema operativo.
Para obtener una lista completa de las configuraciones del BIOS, consulte la Guía de producto en el CD-ROM de Intel Express
Installer o consulte el sitio Web de Intel en
Troubleshooting 故障排除 문제점 해결 トラブルシュート Rozwiązywanie
problemów technicznych Risoluzione dei problemi Résolution de
problèmes Fehlerbehebung Поиск и устранение неисправностей
Solução de problemas Resolución de problemas
The desktop board system fails to boot.
•
Ensure that the power supply cable with the 2x2 connector is plugged into the 12 V (2x2) processor core voltage connector
located near the processor socket on the desktop board.
•
Remove and re-insert the processor, memory, and any add-in cards to make sure they are fully seated. Remove any non-
essential hardware components and boot the system.
•
Disconnect all power and remove the CMOS battery. Wait one minute, then re-install the battery, reconnect power, and
boot the system.
A repeating beep error code is heard and the desktop board does not boot or show any video.
A memory error indicates a problem during detection of the DDR SDRAM memory device. Check to ensure that system
memory is properly installed and that the DIMMs meet the Memory Module Requirements listed in the Supported Components
section of the Product Guide.
A video error indicates a problem during detection of the video card. Check to ensure that the video card is properly installed.
Beep
Description
1, 3
Memory error
8
Video error
台式机主板系统无法启动。
•
确保 2x2 连接器的电源线插入台式机主板上处理器插座旁边的 12 伏 (2x2) 处理器内核电压连接器内。
•
拆卸并重新插入处理器、内存及附加卡，并确保将其完全固定。拆卸任何非必要的硬件组件并启动系统。
•
断开所有电源并取出 CMOS 电池。等待 1 分钟后，再重新安装电池，连接电源，并启动系统。
会听到一遍又一遍的蜂鸣错误代码，台式机主板无法启动或视频无法显示。
内存错误表示 DDR SDRAM 内存设备检测到了问题。 检查并确保系统内存安装正确，DIMM 符合在《产品指南》的
"支持组件"一节中列出的内存模块要求。
视频错误表示视频卡检测到了问题。检查并确保视频卡安装正确。
蜂鸣声
说明
内存错误
1, 3
视频错误
8
20
http://support.intel.com/support/sp/motherboards/desktop/
Intel Desktop Board D915GMH Quick Reference
Publicidad
