Xm Tuner; Basic Operations; Storing And Recalling Broadcast Stations; Advanced Operations Using Special Buttons - Pioneer DEH-P4200UB Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Available accessories

XM tuner

You can use this unit to control an XM satellite
digital tuner (GEX-P920XM), which is sold
separately.
! With this unit, you can operate two addi-
tional functions: XM channel direct selection
and preset channel list.
For details concerning operation, refer to the
XM tuner's operation manuals. This section
provides information on XM operations with
this unit which differs from that described in
the XM tuner's operation manual.

Basic Operations

1
5
1 XM band indicator
2 XM channel number indicator
3 XM preset number indicator
4 XM channel select setting indicator
Shows what channel select setting has been
selected. CH is displayed when
Channel number is selected, and CAT is dis-
played when Category is selected.
5 XM text information
Shows the text information of broadcast
channel.
2
3
4
Select an XM band.
1 Press BAND/ESC.
! Band can be selected from XM-1, XM-2 or
XM-3.
Select a channel.
1 Push M.C. left or right.
! If you push and hold M.C. left or right, you
can increase or decrease channel number
continuously.
! You can also perform tuning from a desired
channel category. (Refer to Selecting a chan-
nel in the channel category on the next page.)
Switching the XM display
1 Press and hold DISP/
Storing and recalling broadcast
stations
You can easily store up to six stations for each
band as presets.
! Six stations for each band can be stored in
memory.
1
Press
(list).
Preset screen is displayed.
2
Use M.C. to store the selected station in
memory.
Turn to change the preset number. Press and
hold to store.
3
Use M.C. to select the desired station.
Turn to change the station; press to select.
# You can also change the station by pushing
M.C. up or down.
Advanced operations using
special buttons
Selecting the XM channel select mode
1 Press S.Rtrv/SAT MODE to cycle between:
Channel number (channel number select set-
ting)—Category (channel category select
setting)
/SCRL.
En
Section
03
27

Publicidad

Tabla de contenido
loading

Tabla de contenido