Tuner; Listening To The Radio - Pioneer SUPER TUNER III KEH-P6025 Manual Del Usuario

Section

Tuner

03

Listening to the radio

1
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on page 11.
If you are using this unit in North, Central or
South America, reset the AM tuning step (see
Setting the AM tuning step on page 30).
1 indicator
BAND
Shows which band the radio is tuned to, AM
or FM.
2 indicator
FREQUENCY
Shows to which frequency the tuner is
tuned.
3
PRESET NUMBER
Shows what preset has been selected.
4 () indicator
STEREO
Shows that the frequency selected is being
broadcast in stereo.
1 Press
SOURCE
2 Use
VOLUME
Rotate to increase or decrease the volume.
3 Press
BAND/ESC
Press
BAND/ESC
played, , ,
F1 F2 F3
10 En
All manuals and user guides at all-guides.com
4 2
indicator
to select the tuner
.
to adjust the sound level.
to select a band
.
until the desired band is dis-
for FM or .
AM
4 To perform manual tuning, press 2 or 3
with quick presses.
The frequencies move up or down step by step.
5 To perform seek tuning, press and hold 2
or 3 for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
3
found.
• You can cancel seek tuning by pressing either
2 or 3 with a quick press.
• If you press and hold 2 or 3 you can skip
broadcasting stations. Seek tuning starts as
soon as you release the buttons.
Note
• When the frequency selected is being broad-
cast in stereo the
light.
indicator will
STEREO ()