Installing Batteries - HoMedics BPW-060-DDM Manual De Instrucciones

INSTALLING BATTERIES

1. The battery cover is
located along the
bottom side of the
monitor. Remove battery
cover by pressing down
and pulling away from
the monitor.
2. Install batteries accord-
ing to the polarity
indications inside the
compartment (as shown
in figure 2). Battery
Type: 2 Alkaline LR03
(AAA) size
3. Place in the other
battery, according to
the polarity indications
inside the compartment
(as shown in figure 3).
4. Replace the cover
by inserting it back
into place.
1.
2.
3.
13
Replace the batteries if:
1. The weak battery
symbol appears in
the display.
2. Nothing appears in the
display when the power
is switched on.
As the supplied batteries
are for test only, they may
be discharged earlier than
batteries you buy in stores.
Replace the batteries in pairs. Use only 1.5V
AAA alkaline batteries. Remove batteries
when unit is not in use for extended periods
of time. Date and time will need to be reset if
batteries are removed or replaced.
Note: Batteries are hazardous waste.
Do not dispose of them together
with the household garbage.
4.
14