Installing Batteries - HoMedics Walgreens 518728 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALLING BATTERIES

1. The battery cover is
located along the top
side of the monitor.
Remove battery cover
by pressing in on sides
and pulling away from
the monitor.
2. Install upper battery first
according to the polarity
indications inside the
compartment. This bat-
tery should be in the
bottom position as
shown in figure 2.
Battery Type: 2 Alkaline
LR03 (AAA) size
3. Place in the other
battery, according to
the polarity indications
inside the compartment
and as shown in figure 3.
1.
2.
3.
13
4. Replace the cover
by inserting it back
into place.
Replace the batteries if:
1. The weak battery
symbol appears in
the display.
2. Nothing appears in the
display when the power
is switched on.
As the supplied batteries are for test only,
they may be discharged earlier than
batteries you buy in stores. Replace the
batteries in pairs. Use only 1.5V AAA alkaline
batteries. Remove batteries when unit is not
in use for extended periods of time.
Note: Batteries are hazardous waste.
Do not dispose of them together
with the household garbage.
4.
14

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido