Publicidad
Idiomas disponibles
Idiomas disponibles
Model A2101 Features and Operation
Display features
Display type
On target indicator
Low Battery indicator
Function indication
Controls - Push-button
On/Off normal mode
Other controls
Optical range
Optical range
Optical angle
Light source
Measurement range
RPM range
Resolution
Accuracy
Memory features
Contact adaptor
Operation and Use of Model A2101
1
Ensure the machine to be measured is in a safe off mode.
2.
Attach small reflective target to machine shaft (6mm x 25mm)
3.
Start machine and point the Tachometer towards the target.
4.
Press and hold the On/Off button at the forward arrow position and hold continuously
5.
Aim light beam onto target, ensure 'on-target' sign is on at bottom of display screen
6
Take rpm reading.
7
Note that the display will illuminate only while measurement is taking place.
8
Release on/off button and display will clear - no memory retention is available.
Models A2102 and A2102/LSR features and operation
Optical systems - Two types of optical system are used: -
Model A2102 has the standard visible light source via an incandescent Minilamp
Model A2102/LSR has enhanced optical Laser light system for greater optical performance.
Both models have a fully autoranging measurement system as standard.
Common Display features & Specification – Models A2102 & A2102/LSR
Display
Display functions
On target indicator
Low Battery indicator
Function icons
Controls - 3 push-buttons
On/off normal mode
On/off inverted mode
Program control
- LCD Vertical, 5 digit display (without
backlight)
- yes
- yes
- rpm legend
- Single action Rocker type "push to measure"
switch
- Not used (used on other models of Advent
Tachometer only)
- 50mm - 500mm
- +/- 45 Deg. to reflective marker
- Minilamp visible light
- 60 - 19,999 rpm (single range)
- +/- 1 rpm
- 0.01% +/- 1 digit
- none
- not functional on this model
- Inverting LCD Vertical 5 digit display
- 180 deg. Inverting
- Yes
- Yes
- "rpm" & "mt" for metres/minute
- Dual action rocker type touch push-button
(UP ARROW)
- As above but for inverted operation (DOWN ARROW)
- Selects rpm or metres/minute modes (mt symbol)
Page 4
Publicidad
