Sunstech TAB104QCBTK Guia Del Usuario página 14

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Turn on the switch on the keyboard power key to ON, the power indicator "Power"
lamp lights for 2 seconds.
2. Press keyboard connect key to pairing the BT lamp start to flicker
3. Turn on BT function of your tablet and start to search 'Bluetooth 3.0 Keyboard' under
available devices. When the tablet detected the keyboard displayed a code number of
pairing.
4. Using the keyboard, type in the requested code to pairing which appeared in your
tablet and press Enter.
Charging instruction:
1- The unit start to flicker the "Power" Indicator when the power battery is low.
2- Connect USB cable to the micro usb port of keyboard and another side of cable
connect to a computer
3. The charger indicator lit up, after 3-4 hours the charging lamp will auto go out when
charging enough.
Sleep mode to save power energy:
The BT keyboard will auto enter sleep mode to save power energy when it doesn't work
for a few minutes, but pressing any key can wake it up within 3 seconds.
Comment issues:
Can't connect with tablet;
1. Make sure turn power key to 'ON'
2. Make sure the distance between BT keyboard and tablet is within 10m
3. Make sure keyboard and tablet have enough power
How to enter in recovery mode.
Please follow these steps.
1-To enter in the recovery mode first you should power off the device,
Then long-press the "ON-OFF" key and "VOL +" key at the same time until the Android
doll has appeared, pls try it.
BLUETOOTH KEYBOARD
How pairing a Tablet with the BT keyboard 3.0
-Recovery mode Function.
12

Publicidad

Tabla de contenido
loading

Tabla de contenido