Publicidad
Align the fork to the brackets
VI.
with the 2nd position hole
VIII.
2 x M8
13 Nm
6
OFFSET LAYOUT LIMITATIONS
70° 60°
01-85-943 | DOC-0018707 rev D | 03-2021
In case of standard mounting
option,the angle of inclination can
only between 60° and 70°
without any collision
Insert and rotate the shaft until the flat surface is
VII.
towards the set screws in the brackets
2 x M8
13 Nm
6
2 x M8
17 Nm
4
www.schreder.com
Set the angle of the fork to
2.
the desired position then
tighten the 4 clamp screws
1.
Tighten the set screws
40°
70°
15°
0°
In case of suspended mounting option,
the angle of inclination could be between
0-15° and between 40-70°
without any collision
10/12
Publicidad
