Publicidad
B - GEARBLAST – DRIVER OVERVIEW
C - LAYOUT AND MOUNTING
ECOBLAST 3
Minimum screw requirement:
Vibration standard
IEC 0.5g / ANSI 1.5g
1x M20 8.8 or A2-70
Minimum fastener
requirement
DIN9021 large plain washer
Tightening torques
M20: 150-175 Nm
- Recommended to use anti-seizing agent (Tikal Tef-Gel®)
- For installations over 3 meters of height: secondary safety
system application is mandatory, which is appropriated for the
luminaire load (for example steel safety cable)
01-85-943 | DOC-0018707 rev D | 03-2021
400 0,8
500
19,7in
ANSI 3g
1x M20 8.8 or A2-70
+
1x M10 8.8 or A2-70
DIN125 plain washers
M20: 150-175 Nm
M10: 35-40 Nm
www.schreder.com
18,45
10,50
A
A
ECOBLAST 4-5-6
22mm
0,87in
75mm
2,95in
331mm
13in
Fasteners not included in the package!
The relevant CxS and weight values can be
found in this document.
A
IP66
max.
6.5kg 14,3lbs
GEAR
R36,7mm
1,44in
75mm
2,95in
2/12
Publicidad
