5. INSTALLATION AND USE
5.1 Safety instructions
ELECTRICAL HAZARD
Danger from electric current!
• No contact with heat sources should take place with the power cord.
• Cord should not hang over edge of table or counter.
• Do not pour water into an appliance that is in operation or that is still hot.
• The device must be properly connected and comply with the regulations in force.
WARNING
In operation, the device can reach high temperatures. To avoid burns and accidents, do not use the device
in malfunction, and do not use spare parts that are not original.
ELECTRICAL HAZARD
Danger from electric current!
If incorrectly installed, the device can be dangerous and cause injury. Before any installation, check the data
of the electrical network. Connect the device only when there is compliance. The appliance must be unpacked
and checked completely before connection by a professional.
5.2 Use
- Unpack the hair dryer completely.
- The hair dryer must be installed from the bottom of the appliance to the floor between 1.20
and 1.60m depending on the height of the users and their position (sitting or standing).
- Drill two 6mm diameter holes, aligned and spaced 94.7mm
FLOOR AREA
Wire
Wire
input
input
Thick
headed
Ankle
Screw
Ankle
Support
Screw
Screw 1
Sign
Ankle
Screw 2
Hidden
EN