STACK-ON TD14-22-GP-E-S Manual Del Usario página 6

BACK UP KEY
A "Back Up Key" has been provided in case you have
forgotten or lost your security code. To open the
safe using the back up key follow the steps below:
1. Remove the cover by pressing the tab and turning
the cover as shown in the illustration. The lock can
hang by the connecting cable while unlocking the
safe.
2. Insert the key in the key hole and turn clockwise
1/4 turn (until stopped) in order to unlock the safe.
Rotate the handle and open the door.
3. Keep the door open until you have entered a new
security code. Before entering your new code,
remove the key and screw the cover back in place.
4. Enter your new security code following the
instructions for entering your security code.
TAB
INSTALLATION OF SCOPE STAND-OFF
NOTE: The scope stand-off will function properly
for many combinations of guns with scopes.
Screw the scope stand-off into the pilot hole of the
barrel rest.
DOOR ORGANIZER ACCESSORIES
Your door organizer provides a variety of storage
options for your supplies.
Note: Securely attach the pistol holsters to the back
panel before you holster your pistol. Make sure the
door accessories do not interfere with items in the
safe or when closing the safe door.
SHELVING
The shelving can be installed by locating the shelf
clips to the desired locations and setting the shelf
in place.
IMPORTANT
Keep keys and combination number in a secure place, away
from children. Keep this record of your key number, serial
number and combination in a secure place separate from
your safe. To order a replacement key set, follow the
instructions on the attached form.
STACK-ON PRODUCTS CO.
P.O. BOX 489, WAUCONDA, IL 60084
6
24
40441-1405