Minolta DYNAX 9 Ti Manual De Instrucciones página 8

CUSTOM FUNCTIONS
Cust 15 — Eyestart Switch
Dial-lock - Disengages the control dials to prevent an accidental turn of the control
dials from changing the exposure settings.
1 – Turns Eyestart on and off.
2 – Turns Dial-lock on and off. Eyestart
3 – Turns Dial-lock on and off. Eyestart
Cust 16 — Release Lock (Lens)
1 – Shutter cannot be released if a lens is not attached.
• – – appears (blinks) in the data panel when the shutter-release button is pressed.
2 – Shutter can be released if a lens is not attached.
Use when mounting the lens to a non-coupling lens mount (telescope, microscope
etc.).
Cust 17 — AF Drive Speed
1 – Speed priority
2 – Silent drive
14
is always on.
is always off.
Cust 18 — Control Dial Tasking
1 – Default operation
Exposure
Mode Front Control Dial
P - Mode No function
A - Mode Aperture
S - Mode Shutter speed
2 – Creative Program
Creative program control (P / Ps) lets you override the exposure settings
A
selected by the camera in P- mode. A and S- mode operation does not change.
Exposure
Mode Front Control Dial
P - Mode Ps - shutter speed
A - Mode Aperture
S - Mode Shutter speed
3 – Exposure Compensation Using Rear Control Dial - (P
Front Control Dial in P Mode)
Changes the tasking for the rear control dial to exposure compensation.
• The exposure compensation value is displayed in the meter index.
• Exposure compensation dial must be set to +/– 0.
• Compensation range is +/– 3 EV for both 1/2 and 1/3 EV increments.
• The bottom display in the viewfinder does not show the marks "+" or " _ ".
Exposure
Mode Front Control Dial
P - Mode P - aperture
A
A - Mode Aperture
S - Mode Shutter speed
Control Dial Tasking
Rear Control Dial
No function
Aperture
Shutter speed
Control Dial Tasking
Rear Control Dial
P - aperture
A
Aperture
Shutter speed
Mode with
A
Control Dial Tasking
Rear Control Dial
Exposure
compensation
15