Tabla De Contenido - Stihl HT-KM Manual De Instrucciones

Contents
KombiSystem
Guide to Using this Manual
Safety Precautions and Working
Techniques
Using the Unit
Approved KombiEngines
Assembling the Unit
Mounting the KombiTool
Cutting Attachment
Mounting the Bar and Chain
Tensioning the Chain
Checking Chain Tension
Chain Lubricant
Filling Chain Oil Tank
Checking Chain Lubrication
Fitting the Harness
Starting / Stopping the Engine
Operating Instructions
Storing the Machine
Taking Care of the Guide Bar
Checking and Replacing the Chain
Sprocket
Maintaining and Sharpening the
Saw Chain
Maintenance and Care
Main Parts
Specifications
Maintenance and Repairs
Disposal
Trademarks
{
HT-KM
2
2
3
10
12
13
14
14
15
16
16
16
17
19
19
20
21
21
22
22
23
27
28
29
30
30
30
This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process
with electronic systems.
Allow only persons who fully understand
the manuals of the KombiEngine and
pole pruner KombiTool to operate this
power tool combination.
To receive maximum performance and
satisfaction from your STIHL
KombiTool, it is important that you read,
understand and follow the safety
precautions and the operating and
maintenance instructions in chapter
"Safety Precautions and Working
Techniques" before using your
KombiTool. For further information you
can go to www.stihlusa.com.
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in the
two manuals.
WARNING
Because a KombiEngine equipped with
a pole pruner KombiTool has a high-
speed cutting attachment some special
safety precautions must be observed to
reduce the risk of personal injury.
Careless or improper use may cause
serious or even fatal injury.
English
1