Blue Clean AR 240 S Instrucciones De Montaje, Cuidado Y Uso página 7

ASSEMBLY INSTRUCTIONS
3
4
I
D
Connect the other end of Soft PVC high pressure hose
(D) to spray gun (I) by inserting the brass metal tip of
high pressure hose into the fitting just ahead of trigger
guard. It will lock into spray gun with a "click". Confirm
hose is locked into spray gun by slightly pulling on them.
The hose is now securely attached to spray gun.
Note: DO NOT press button on underside of gun when
connecting hose to gun.
15ANR011 AR240S_1700PSI ENG-FR-SP.indd 7
A
D
Soft PVC High Pressure Hose Assembly
Screw Soft PVC high pressure hose (D) clockwise onto
bottom front of power washer unit (A). Pull back collar
and insert o-ring post into water outlet far enough so
collar can thread onto outlet threads until hand tight.
If it takes fewer than six turns you have not properly
tightened the Soft PVC high pressure hose fitting. It is
easier to position the power washer in front of you to
ensure that the threads are started correctly. Failure
to properly tighten Soft PVC high pressure hose will
result in the hose slipping or popping off immediately
upon turning unit on. Do not worry about damage if this
occurs–just reinstall and take extra care when screwing
on the Soft PVC high pressure hose fitting.
Note: DO NOT use pliers or locking pliers to tighten.
5
I
D
2
To release hose (D) from spray gun (I), press button on
underside of gun toward trigger guard. The hose will
slide out from connection.
7
16/12/17 下午1:43