Kohler K-1111-H2 Manual Del Usuario página 5

Lighted User Keypad
User Keypad
Available modes will be illuminated in blue. Active modes will be illuminated in green.
Turns the whirlpool pump on and off.
Power
Outer Ring Rotate the outer ring to the desired mode. The selected mode will flash blue.
OK Activates the desired mode.
Flexjet Flow When illuminated, the adjustable jet water flow can be adjusted by pressing the up or
down arrow.
Mode
Increases the water flow when the Flexjet flow mode is active. Increases the pulse speed
Up Arrow
when the neckjet or backjet mode is active.
Indicator Bar Displays the water flow volume in the Flexjet flow mode. Displays the pulse speed in the
neckjet or backjet mode.
Effervescence Ports activate to provide a gentle, soothing bubbling action. The Flexjet mode, backjets,
Mode and neckjets will automatically turn off when this mode is activated.
Down Arrow Decreases the water flow when the Flexjet flow mode is active. Decreases the pulse speed
when the neckjet or backjet mode is active.
Chromatherapy Rotate the outer ring to select this mode, then press OK. The chromatherapy lights will
Cycle automatically and continuously cycle through eight colors. One cycle through all eight
colors takes approximately one minute. Only one of the two keypads controls this mode.
Heater Automatically engages when the power icon is selected. Rotate the outer ring until the
heater mode is flashing, then press OK to turn the heater off. Press OK again to turn the
heater back on.
Chromatherapy Rotate the outer ring to select this mode. Press OK, press the up or down arrow to select a
Specific Color color, then press OK again. Only one of the two keypads controls this mode.
Kohler Co.
Flexjet Flow Mode
Activates Mode
Selected
Rotate outer
ring to access
desired mode.
Chromatherapy -
Specific Color
Power
On/Off
Increases Flow
or Pulse Rate
Indicator Bar - Shows
Water Flow Volume
Chromatherapy
Cycle
Decreases
Flow
Heater
5 1042951-5-D