Introduction; Dear Customer; Symbols On The Machine - Husqvarna 235e Manual De Instrucciones

Dear customer!

Congratulations on your choice to buy a Husqvarna
product! Husqvarna is based on a tradition that dates back
to 1689, when the Swedish King Karl XI ordered the
construction of a factory on the banks of the Huskvarna
River, for production of muskets. The location was logical,
since water power was harnessed from the Huskvarna
River to create the water-powered plant. During over 300
years of continuous operation, the Husqvarna factory has
produced a lot of different products, from wood stoves to
modern kitchen appliances, sewing machines, bicycles,
motorcycles etc. In 1956, the first motor driven lawn
mowers appeared, followed by chain saws in 1959, and it
is within this area Husqvarna is working today.
Today Husqvarna is one of the leading manufacturers in
the world of forest and garden products, with quality as our
highest priority. We develop, manufacture and market high
quality motor driven products for forestry and gardening as
well as for building and construction industry.
Your purchase gives you access to professional help with
repairs and service whenever this may be necessary. If the
retailer who sells your machine is not one of our authorized
dealers, ask for the address of your nearest servicing
dealer.
It is our wish that you will be satisfied with your product and
that it will be your companion for a long time. Think of this
operator ' s manual as a valuable document. By following
its ' content (using, service, maintenance etc) the life span
and the second-hand value of the machine can be
extended. If you ever lend or sell this machine, make sure
that the borrower or buyer gets the operator ' s manual, so
they will also know how to properly maintain and use it.
Thank you for using a Husqvarna product.
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify the
design and appearance of products without prior notice.
For customer assistance, contact us at our website:
www.usa.husqvarna.com

Symbols on the machine:

WARNING! Chain saws can be
dangerous! Careless or improper use
can result in serious or fatal injury to
the operator or others.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
6 – English

INTRODUCTION

Both of the operator ' s hands must be
used to operate the chain saw.
Never operate a chain saw holding it
with one hand only.
Contact of the guide bar tip with any
object must be avoided.
WARNING! Tip contact may cause the
guide bar to move suddenly upward
and backward (so-called kickback),
which may cause serious injury.
Measured maximum kickback value
without chain brake for the bar and
chain combination on the label.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
You will find the following labels on your chain saw:
The Emissions Compliance Period referred to on the
Emission Compliance label indicates the number of
operating hours for which the engine has been shown to
meet Federal emissions requirements.
Maintenance, replacement, or repair of the emission
control devices and system may be performed by any
nonroad engine repair establishment or individual.
1154212-49 Rev.8 2014-12-03