Before You Begin; Tools And Parts Needed; Parts Included; Installation Accessories - Gaggenau VP 230 620 Instrucciones De Instalación

en-us

Before you begin

Before you begin
T ools and parts needed
B e f o r e y o u b e g i n
▯ Phillips Head Screwdriver
Pencil
▯
▯ Drill with ¼" (6 mm) bit
Jigsaw
▯
Tape Measure
▯
Note: Additional materials may be necessary for
installation in solid surface countertops. Contact the
countertop manufacturer.

Parts included

Installation accessories

VD 200 020 Black appliance cover
VV 200 010 Stainless steel connection strip for
combining with other Vario 200
appliances
VV 200 020 Black connection strip for combining
with other Vario 200 appliances
Use the accessories only as indicated. The manufacturer
assumes no liability for incorrect usage of the
accessories.
6

Cabinet Requirements

The distance from the top of the cooktop to the bottom of
cabinets above can be reduced to 24" when the bottom of
the wood or metal cabinet is protected by not less than
¼" (6.35 mm)-thick flame-retardant millboard covered
with not less than No. 28 MSG sheet metal, 0.015 inch
(0.4 mm) stainless steel, 0.024 inch (0.6 mm) aluminum
or copper.

Countertop Requirements

9 WARNING
To reduce the risk of ignition of surrounding
combustible materials, install at least 1¼" (30 mm)
from both sidewalls and at least 2" (50 mm) from
the rear wall.
The countertop must be level and horizontal. The stability
of the countertop must be maintained after the cut-out
has been made.