Countertop Requirements; Installation Procedure; Prepare Installation Space - Gaggenau VR 230 620 Instrucciones De Instalación

Countertop Requirements

9 WARNING
To reduce the risk of ignition of surrounding
combustible materials, install at least 8" (200 mm)
from both sidewalls and at least 2" (50 mm) from
the rear wall.
The countertop must be level and horizontal. The stability
of the countertop must be maintained after the cut-out
has been made.

Installation Procedure

P repare Installation Space
I n s t a l l a t i o n P r o c e d u r e
C reate the cut-out in the countertop for one or several
P r e p a r e I n s t a l l a t i o n S p a c e
Vario appliances according to the installation diagram.
The angle of of the cut surface to the countertop must
be 90°.
After creating cut-out, remove shavings. Seal cut
surfaces in a heat-resistant manner.
Some solid surface countertops require special
installations. For example, heat reflective tape and
rounded corners may be necessary. Contact the
countertop manufacturer for instructions specific to your
countertop.
Observe minimum distance between appliance underside
and furniture parts of 3 /
8
When installing multiple Vario appliances: Take into account
space requirement for VV 200 010/020 connection strip
between the appliances. Appliances can also be installed
in individual cut-outs, bearing in mind a minimum
distance between the appliances of 1
Installation Procedure
" (10 mm).
9 / " (40 mm).
16
en-us
7