SPECIFICATIONS/ACCESSORIES
SPECIFICATIONS
Axle:
Aerating Depth:
Aerating Pattern:
Aerating Width:
Chassis:
Hitch:
ACCESSORIES
DRAGMAT (Service Parts Only) - When aerating a
fairway, a dragmat can be attached directly behind
the Tracaire to break up the cores while aerating all
in one quick easy operation.
Mat size: 12' (3 658mm) wide X 10' (3 048mm) long.
INSTALLATION
1. Remove the two (2) outside screws on outside
pillow blocks of frame.
2. Attach bracket assembly C (547139) using (2)
1/2-13 X 1-3/4" screws A (312176) and (2)
lockwashers B (120166) as shown. Repeat for
opposite side.
3. Insert "S" hooks in hole in bracket assembly
attaching dragmat assembly to aerator.
1-1/4" (3.2cm) diameter steel
rod clamped to frame
Up to 5" (12.7cm)
6" X 6" (15.2cm x 15.2cm)
6' (183cm)
2" (5.1cm) diameter high
strength steel pipe
Standard SAE 3-point tractor
hitch (category 1)
Lubrication:
Operating Speed:
Tines:
Weight:
Wheels:
Cast iron with sintered bronze
bushings, grooved each side for
mounting aerating tines on both
sides
Lubrication Fittings
Up to 10 mph (16.1km)
See Aerating Tools (Page 9)
Approx. 800 lbs. (363kg)