Device Description; Initial Use; Basic Settings; Setting The Time - Beurer WL 70 Instrucciones De Uso

5. Device description

2
1
1 Display
2 Light area
3 Snooze function
( vibration of the device)
4 Keypad
Alarm button /
button
button
Radio button /
■ button

6. Initial use

• Remove the packaging material.
• Check that all parts listed are present.
• Check the device, mains adapter and AUX cable for
damage.
• Place the device on a firm, even surface.
• Insert the mains adapter connector into the mains
adapter socket on the rear of the device.
• Insert the mains adapter into a suitable socket.
• The time is shown on the device display.
• Route the cable antenna of the device to the rear.
3
4
5
6
5 +/- buttons
6 Light button
AUX button /
button
Menu/Set
button

7. Basic settings

In the basic settings, you can set the time (TIME), the alarm
properties for the set alarm times (ALARM 1, ALARM 2,
A L A R M 3 ), the display brightness (D I S P L A Y ), the
snooze duration (SN O O ZE) and the button tone (B E E P)
in the order stated here.

7.1 Setting the time

• When the device is switched on, press the
Menu/Set button. "T I M E" flashes in the display. Press
the Menu/Set button again.
• The hour mode "24 Hr" flashes in the display. Set hour
mode using the / buttons (24-hour mode or 12-hour
mode). Confirm using the Menu/Set button.
• The hour display flashes in the display. Set the hours
using the / buttons. Confirm using the Menu/Set
button.
• The minute display flashes in the display. Set the
minutes using the
Menu/Set button.
• The weekday display flashes in the display. Set the day
of the week using the
Menu/Set button.
Note
MO N = Monday, T U E = Tuesday, WE D = Wednesday,
T H U = Thursday, F R I = Friday, S A T = Saturday,
SU N = Sunday.

7.2 Setting the alarm properties

You can choose to wake up with one of the 4 wake-up
melodies, an alarm tone or the radio.
For the alarm times that have been set (see section 8.1),
you can configure the following alarm properties: alarm
tone, volume, sunrise, duration of sunrise, brightness of
sunrise.
To configure the alarm properties, proceed as follows:
• When the device is switched on, press the Menu/Set
button. "T I M E" flashes in the display.
• Use the / buttons to select the desired alarm
storage location (A LA R M 1 , A LA R M 2 or A LA R M 3 )
for which you wish to configure the functions. Confirm
using the Menu/Set button.
• The currently set alarm tone (e.g. B U Z Z) flashes. Use
the / buttons to select the desired alarm tone.
Confirm using the Menu/Set button.
11
/ buttons. Confirm using the
/ buttons. Confirm using the