Craftsman CMXPTSG1013NB Manual De Instrucciones página 14

Storage
Before you store the tool, make sure you do the following:
1. Review the Maintenance section on the preceding pages and perform scheduled
maintenance as necessary.
2. Tool must be well cleaned and lightly lubricated before storing.
3. Store the tool in a dry, safe place out of the reach of children.
Register Online
Thank you for your purchase. Register your product now for:
•
WARRANTY SERVICE: Registering your product will help you obtain more efficient
warranty service in case there is a problem with your product.
•
CONFIRMATION OF OWNERSHIP: In case of an insurance loss, such as fire, flood or
theft, your registration of ownership will serve as your proof of purchase.
•
FOR YOUR SAFETY: Registering your product will allow us to contact you in the unlikely
event a safety notification is required under the Federal Consumer Safety Act.
Register online at www.craftsman.com/registration
TROUBLESHOOTING
Spindle lock will not pop up:
1. Debris is in between body and spindle lock .
2. Debris is between spindle lock
Use a lubricant spray such as
WD-40 and spray the outside of
the spindle and the around
9
the spindle. Turn the spindle
lock left and right until spindle
6
lock pops up. Continue to
6
lubricate until spindle lock
works smoothly.
and spindle .
6
6
6
9
6
ENGLISH
6
9
13