Craftsman CMXPTSG1013NB Manual De Instrucciones página 9

ENGLISH
3. Place 2 – 3 drops of air tool oil (not
included) into the opening of the male
air plug before each use.
4. Make sure spindle lock
unlocked position before operating.
Push down on spindle lock
turn clockwise to unlock the spindle
lock. Cutting disc
freely.
WARNING: Make sure the hex key
bolt and the hex nut
4
the cutting disc
before using.
5. Connect air supply hose to the male
plug. Set the working pressure at 90 PSI
for best tool performance.
NOTICE: Working pressure refers to the air
line pressure set to tool when tool is under
working conditions.
8
is in the
6
and
6
should spin
2
holding
5
in place are tight
2
4
5
2
6