Instructions For Assembly; List Of Spare Parts - Kettler Turnreck 0S03011-0000 Manual Del Usuario

Assembly Instructions
GB
Regularly grease the moving parts with some drops of oil.
Waste Disposal: KETTLER products are recyclable. At the end of its useful life please dis-
pose of this article correctly and safely (local refuse sites).

Instructions for Assembly

Ensure that you have received all the parts required (see check list) and that they are un-
damaged. Should you have any cause for complaint, please contact your KETTLER dealer.
Before assembling the equipment, study the drawings carefully and carry out the operati-
ons in the order shown by the diagrams. The correct sequence is given in capital letters.
The fastening material required for each assembly step is shown in the diagram inset. Use the
fastening material exactly as instructed. The required tools are supplied with the equipment.
The equipment must be assembled with due care by an adult person. If in doubt call upon
the help of a second person, if possible technically talented.
Please note that there is always a danger of injury when working with tools or doing ma-
nual work. Therefore please be careful when assembling this machine.
Ensure that your working area is free of possible sources of danger, for example don't lea-
ve any tools lying around. Always dispose packaging material in such a way that it may not
cause any danger. There is always a risk of suffocation if children play with plastic bags!
Bolt all the parts together loosely at first, and check that they have been assembled cor-
rectly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tigh-
ten nuts completely against resistance (locking device). Then check that all screw connec-
tions have been tightened firmly. Attention: once locknuts have been unscrewed they no
longer function correctly (the locking device is destroyed), and must be replaced.
For technical reasons, we reserve the right to carry out preliminary assembly work (e.g.
addition of tubing plugs).

List of spare parts

When ordering spare parts, always state the full item number, spare-partnumber, the quan-
tity required and the S/N of the product (see spare parts drawing).
Example order: item no. 0S03011-0000 / spare-part no. 10100030 / 2 pieces / S/N......
Important: spare part prices do not include fastening material; if fastening material (bolts,
nuts, washers etc.) is required, this should be clearly stated on the order by adding the words
„with fastening material".
Please keep original packaging of this article, so that it may be used for transport at a later date,
if necessary. Goods may only be returned after prior arrangement and in (internal) packaging,
which is safe for transportation, in the original box if possible. It is important to provide a de-
tailed defect description / damage report!
KETTLER GB Ltd.
GB
KETTLER House, Merse Road · North Moons Moat · Redditch, Worcestershire B98 9HL
KETTLER International Inc.
USA
1355 London Bridge Road · Virginia Beach, VA 23453
http://www.kettler.de
6