Symbols; Instructions; Cleaning; Guarantee - Multimetrix DMM 240 Manual De Instrucciones

1.1.3 Symbols

According to WEEE directive 2002/96/EC
Refer to the user's manual
Risk of electric shock
Double insulation

1.1.4 Instructions

Before opening the instrument, disconnect it from the circuits to be
measured and make sure that you are not charged with static electricity,
which could irreparably damage the instrument's internal elements.

1.1.5 Cleaning

Disconnect external circuit leads and turn off the instrument. Clean with
a damp cloth and soap. Never use abrasive products or solvents.
Make sure the instrument is perfectly dry before using it again.
1.1.6 Protection factor (PF)/Humid environment
This instrument has a PF67 protection factor, which means that it is
extremely waterproof and will not be damaged by water immersion
(when turned off).
However, the instrument and its accessories must be completely dry
(including inside measurement terminals) before being used again.

1.2 Guarantee

This equipment is guaranteed against any material or manufacturing
flaws, as specified in the general terms of sale. During the guarantee
period (1 year), the instrument can only be repaired by the manufacturer,
who reserves the right to repair the instrument or to exchange all or part
of it. If the equipment is returned to the manufacturer, the outgoing
transport costs are borne by the customer.
The guarantee is not applicable in the following cases:
1. improper use of the equipment or use in conjunction with
incompatible equipment;
2. modifications to the equipment without the explicit authorisation of
the manufacturer's technical department;
3. work carried out on the instrument by a person not approved by the
manufacturer;
4. adaptation for a specific application, not included in user's manual
5. knocks, falls or prolonged immersion.
20
Chapter II
DMM240