Front Panel; Rear Panel - Intellinet Network Solutions 561242 Instrucciones

24-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports and LCD Screen
The Intellinet 24-Port Gigabit Ethernet Ultra PoE Switch with 2 SFP Ports and LCD Screen offers an array
of time-saving, cost-effective features while providing superior network throughput. No configuration is
required and installation is plug and play. Thanks to its optional desktop and 19" rackmount design, superior
performance and value, the switch is the perfect choice for your small office home or home network.
With a backplane speed of 52 Gbps, plenty of performance is available for your computers,
servers and other networking devices. Each of the ports automatically senses the link speed of the
connected network device and adjusts to 10, 100 or 1000 Mbps for compatibility and maximum
performance. Designed to give ample power to compatible devices that need them, this PoE+
switch offers up to 30 watts of power per port until its power budget of 370 watts is reached.
Green Ethernet Technology
More often than not, a network switch does not utilize all its ports at all times. Normally, when a computer,
notebook, network printer or other network-connected device is powered down, the switch continues to consume
the same amount of power as if the port were still active. Now, thanks to the new, energy efficient IEEE 802.3az
technology, this Intellinet switch detects link status to all connected devices and reduces the power usage of
ports not in use. In addition, the switch can adjust the level of power output based on the length of the network
cable connected to a particular port. This feature allows for the enjoyment of maximum network performance,
and when things slow down, it automatically scales back power usage to conserve energy and save money.

Front Panel

LED
PWR
Green
Orange
LNK/ACT/
(1 – 24)
Speed
Green (1 –24,
SFPs 1 & 2)
PoE
Green

Rear Panel

Power
Use the included power cord to connect the device (on the rear panel) to
an AC outlet. The device supports AC 100 – 240 V, 50/60 Hz.
Chassis Ground Column
Located on the right side of the power supply connector, the grounding terminal connector
is used to provide proper grounding for your Intellinet data switch. If you use the chassis
grounding screw, it should be wired to an object that provides earth ground. In rackmount
installations, grounding is typically provided by the metal frame of the mounting rack.
2 English
COLOR STATUS
Off
On
Off
On
Flashing
On
Flashing
Off
On
Flashing
STATUS DESCRIPTION
Power Off
Power On
No device connected.
A device is connected to the port at 10/100 Mbps speed.
Sending or receiving data.
A device is connected to the port at 1000 Mbps speeds.
Sending or receiving data.
No PSE/PoE device is linked.
The connected device is receiving power.
Abnormal power supply.
Instructions