Programs Screen - voestalpine Böhler URANOS 2700 PMC Instrucciones De Uso

6 Wire diameter
7 Header
(See the "Main screen" section).
NO PROGRAM
Indicates that the selected synergic program is not avail-
able or is not consistent with the other system settings.
2 Synergic curves
MIG/MAG
G3/4 Si1 CO 2
G3/4 Si1 Ar 18%CO 2
CrNi 19 9 Ar 2%CO 2
AlMg5 Ar
AlSi5 Ar
Al99,5 Ar
CuAl8 Ar
CuSi3 Ar
Basic FCW Ar 18%CO 2
Rutil FCW Ar 18%CO 2
Metal FCW Ar 18%CO 2
CrNi 19 9 FCW Ar 18%CO 2
Pulsed MIG/MAG
G3/4 Si1 CO 2
G3/4 Si1 Ar 18%CO 2
CrNi 19 9 Ar 2%CO 2
AlMg5 Ar
AlSi5 Ar
Al99,5 Ar
CuAl8 Ar
CuSi3 Ar
Basic FCW Ar 18%CO 2
Rutil FCW Ar 18%CO 2
Metal FCW Ar 18%CO 2
CrNi 19 9 FCW Ar 18%CO 2

3.8 Programs screen

1 General
Allows the storage and management of 64 welding pro-
grams which can be personalised by the operator.
1/2/3/4 Functions
5 Number of the selected program
6 Main parameters of the selected program
7 Description of the selected program
8 Heading
(consult the "Main screen" section).
44
Ø (mm)
0,6 0,8 1.0 1.2
1 2 3
6 7 8
13
11 12
- 17 18
- 22 23
- 27 28
- 32 33
- 37 38
- - -
-
- -
- - -
- - -
Ø (mm)
0,6 0,8 1.0 1.2
- - -
6 7 8
11 12 13
- 17 18
22 23
-
- 27 28
- 32 33
- 37 38
- - -
- - -
- - -
- -
-
2 Program storage
Enter the "program storage" menu by pressing button
for at least 1 second.
4
9
14
19
24
29
34
39
42
46
50
54
ù
-
9
14
19
24
29
34
Select the required program (or the empty memory) (5)
39
by rotating the encoder.
42
46
Program stored
50
54
Memory empty
Cancel the operation by pressing button (2)
Save all the current settings on the selected program by
pressing button (3)
Introduce a description of the program (7).
- Select the required letter by rotating the encoder.
- Store the selected letter by pressing the encoder.
- Cancel the last letter by pressing button (1)
Cancel the operation by pressing button (2)
Confirm the operation by pressing button (3)
The storage of a new program on an already occupied
memory location requires cancellation of the memory
location by an obligatory procedure.
.
.
.
.
.