Instructions For Assembly; List Of Spare Par Ts; Waste Disposal - Kettler ERGORACE Manual Del Usuario

Nobody may be in the moving range of a training person during
I
training.

Instructions for Assembly

Ensure that you have received all the parts required (see check list)
I
and that they are undamaged. Should you have any cause for com-
plaint, please contact your KETTLER dealer.
Before assembling the equipment, study the drawings carefully and
I
carry out the operations in the order shown by the diagrams. The
correct sequence is given in capital letters.
The equipment must be assembled with due care by an adult
I
person. If in doubt call upon the help of a second person, if pos-
sible technically talented.
Please note that there is always a danger of injury when working
I
with tools or doing manual work. Therefore please be careful
when assembling this machine.
Ensure that your working area is free of possible sources of danger,
I
for example don't leave any tools lying around. Always dispose
packaging material in such a way that it may not cause any
List of spare par ts page 24-25-26
When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the
product (see handling).
Example order: Art.no.07988-800 / spare-part no. 10100030 /
2 pieces / S/N ....................
Please keep original packaging of this article, so that it may be
used for transport at a later date, if necessary.
Goods may only be returned after prior arrangement and in
(internal) packaging, which is safe for transportation, in the ori-
ginal box if possible.
It is important to provide a detailed defect description / damage
report!
Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this should
be clearly stated on the order by adding the words „with fastening
material".
danger. There is always a risk of suffocation if children play with
plastic bags!
The fastening material required for each assembly step is shown in
I
the diagram inset. Use the fastening material exactly as instructed.
The required tools are supplied with the equipment.
Bolt all the parts together loosely at first, and check that they have
I
been assembled correctly. Tighten the locknuts by hand until resi-
stance is felt, then use spanner to finally tighten nuts completely against
resistance (locking device). Then check that all screw connections
have been tightened firmly. Attention: once locknuts have been
unscrewed they no longer function correctly (the locking device is
destroyed), and must be replaced.
For technical reasons, we reserve the right to carry out preliminary
I
assembly work (e.g. addition of tubing plugs).

Waste Disposal

KETTLER products are recyclable. At the end of its
useful life please dispose of this article correctly and
safely (local refuse sites) .
KETTLER (GB) Ltd.
Merse Road · North Moons Moat · Redditch, Worcestershire
B98 9HL · Great Britain
http://www.kettler.co.uk
KETTLER International Inc.
1355 London Bridge Road · Virginia Beach · Virginia VA
23453 USA
http://www.kettlerusa.com
english
5