Grease Filters; Replacing The Activated Charcoal Filter - Infiniton CMPTRAL-NG61 Manual De Usuario

MAINTENANC
OPENNING PANEL
 Push the panel first and then pull it to open.
 Clean the outside with a damp cloth and neutral detergent. Clean the
inside using a damp cloth and neutral detergent; do not use wet clothes or
sponges, or jets of water; do not use abrasive substances.

GREASE FILTERS

CLEANING METAL SELF-SUPPORTING GREASE FILTERS
 The filters must be cleaned every 2 months of operation, or
more frequently for particularly heavy usage, and can be
washed in a dishwasher.
 Pull the comfort panels to open them.
 Remove the filters one by one pushing them towards the back
side of the hood unit and simultaneously pulling downwards.
 Any kind of bending of the filters has to be avoided when
washing them. Before fitting them again into the hood make sure
that they are completely dry. (The color of the filter surface may
change throughout the time but this has no influence to the filter
efficiency).
 When fitting the filters into the hood pay attention that they are
mounted in correct position the handle facing outwards.
Close the comfort panel.

ACTIVATED CHARCOAL FILTER (RECIRCULATION VERSION)
These filters are not washable and cannot be regenerated, and must be replaced approximately
every 4 months of operation, or more frequently with heavy usage.

REPLACING THE ACTIVATED CHARCOAL FILTER

 Open the comfort panels pulling them downwards.
 Remove the metal grease filters
 Remove the saturated activated charcoal filter.
 Fit the new filters.
 Replace the metal grease filters.
 Close the comfort panel
FIX
REMOVE
EN-9
REMOVE
FIX