Grease Filters; Replacing The Activated Charcoal Filter - Infiniton CMPT-CLR92S Manual Del Usuario

MAINTENANCE

GREASE FILTERS

CLEANING METAL SELF-SUPPORTING GREASE FILTERS
The filters must be cleaned every 2 months of operation, or

more frequently for particularly heavy usage, and can be
washed in a dishwasher.
Remove the filters one by one pushing them towards the back

side of the hood unit and simultaneously pulling downwards.
Any kind of bending of the filters has to be avoided when washing

them. Before fitting them again into the hood make sure that they
are completely dry. (The color of the filter surface may change
throughout the time but this has no influence to the filter efficiency).
When fitting the filters into the hood pay attention that they are

mounted in correct position the handle facing outwards.
ACTIVATED CHARCOAL FILTER (RECIRCULATION VERSION)
These filters are not washable and cannot be regenerated, and must be replaced approximately
every 4 months of operation, or more frequently with heavy usage.

REPLACING THE ACTIVATED CHARCOAL FILTER

Remove the metal grease filters.

Remove the saturated activated charcoal filter.

Fit the new filters.

Replace the metal grease filters.

LIGHTING
LIGHT REPLACEMENT
Replacing the light modules
You cannot replaced the light bulbs, the entire light module has to be replaced.

When changing the light modules, the contacts are live.

Before changing the light module(s), unplug the appliance from the mains or switch off the

circuit breaker in the fuse box.
EN-11