Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Using the Remote Control
Before You Begin
You will need to remove battery protector before using. Remove plastic tab
inserted into battery compartment by gently pulling in the direction of the
arrow indicated.
Install/Replace Remote Control Battery
One lithium battery is already installed at the factory. When the remote con-
trol stops operating or when the operating range is reduced, replace the
battery with a new one.
1. Open the battery compartment cover located on the back of the remote.
2. Remove old battery from remote control.
3. Insert one 3-volt lithium battery (Model #: CR2025), checking that the
positive polarity faces towards you.
4. Close the compartment cover.
Remote Control Features
Use the remote to control the following functions of your iSoundSpa (For
best results, aim remote control toward the front of the unit.)
Turns iSoundSpa on or off or resets alarm when alarm is sounding
Toggles through audio selections.
Toggles through six nature sounds.
Increases volume level.
Skip to previous track when playing iPod, or HOLD to scan current playing track.
In iPod mode, plays tracks. When playing, press to pause track.
Advance to next track when playing iPod, or HOLD to scan current playing track.
Decreases volume level.
Projects time in soothing blue light. When projection is on, press to turn off.
Mute.
Snooze mode when alarm is sounding, NAP function when iSoundSpa is off.
1 6
Maintenance
To Store
You may leave the unit on display, or you can store it in its box
in a cool, dry place.
To Clean
Use only a soft dry cloth to clean the enclosure of the unit.
NEVER use liquids or abrasive cleaner to clean.
Modifications not authorized by the manufacturer may void
users authority to operate this device.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful inter-
ference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interference to radio com-
munications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
1 7
Publicidad
Tabla de contenido
