Metra 95-7366B Instrucciones De Instalación página 3

1. Secure the radio brackets to the radio
using the screws supplied with the
radio. (Figure A)
2. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to the
radio. Metra recommends using the proper
mating adapter from Metra and/or Axxess.
Test the radio for proper operation.
3. Secure the radio assembly to the
dash using the factory screws, then
reassemble the dash in reverse order of
disassembly to complete the installation.
KIT ASSEMBLY
(Figure A)
3
REV. 10/30/2019 INST95-7366B