Webasto Cool Top Trail 34 Instrucciones De Operación Y Instalación página 12

Fig. 17: Attaching the air distributor assembly to the
mounting bracket
Fig. 18: Fixing air distributor assembly to the mounting
bracket
Fig. 19: Fixing the air distributor to the ceiling
1
3
Fig. 20: Installing the air filter
Cool Top Trail 34
Attach the air distributor (1) to the air distributor
X
mounting bracket by engaging the two parts.
– You will hear four clicks as the parts (2) connect
together.
1
2
Fix the air distributor (1) on the air distributor
X
mounting bracket with four ST4.2*19 pan head
screws (2).
1
2
NOTE
This step is optional. The purpose of these
screws is only to close a potential gap be-
tween the air distributor and the ceiling of
the vehicle.
1
2 Remove the screw caps (3) from around the perime-
X
ter of the air distributor (1).
3
Fix the air distributor to the ceiling using 8 counter-
X
sunk head screws (2).
Mount the screw caps again to the air distributor.
X
Install the air filter (3) as shown:
Insert the lips of the filter in the slots (1).
X
Move the filter upwards and make sure the tabs en-
X
gage (2)
2
12