Condensation; Choosing And Using A Generator; Remote Control - Webasto Cool Top Trail 34 Instrucciones De Operación Y Instalación

5.3

Condensation

When warm, moist air within the vehicle meets with a
cold surface, condensation water may be formed. This
is also known as "sweating". In this case, take the fol-
lowing measures:
■ Close and seal all doors, skylights, and windows to
reduce the entrance of warm moist air.
■ Operate the inside fan on high fan speed, avoid low
and auto fan speeds.
During the operation of the air conditioner, conden-
sate water will be produced and allowed to drain onto
the roof. This is normal. The amount of condensate
water is a function of air humidity. High humidity in-
5.5

Remote control

8
7
6
5
21 °C/°F DIM
20
19
18
LIGHT
17
DISPLAY TIMER
16
15
SET TIME
HOUR/MIN
Fig. 22: Remote control overview
Cool Top Trail 34
Display symbols:
1. Mode display
COOL/FAN/DRY/HEAT/AUTO
1
2. Fan speed display
2
Low/Medium/High/Auto
3. Lock function display
4. Sleep function display
3
4 5. Timer ON/OFF status indicator
9
6. Clock/Timer display
Real time clock, Time of timer
10
LOCK
during setup.
7. Temperature display
11
MODE
Shows the set point tempera-
ture or the indoor temperature.
Units in °C or °F.
12
FAN
8. Data Transmission
Symbols shows up briefly when
13
SLEEP
the remote control transmits
data to the A/C unit.
Operation keys:
14
9. DIM key (Available only for
units with lights)
Selects the brightness of the
LED lights: 25%, 50%, 75%,
100%
10. LOCK key
Disables the touch control on
the air distributor when the
unit is ON. Press the key again
to unlock.
11. MODE key
Selects the operation mode
COOL/DRY/FAN/HEAT/AUTO.
side the vehicle will result in more condensate water
being generated.
Please note that losses or damage caused by
condensate water are not within warranty scope.
5.4

Choosing and using a generator

The Cool Top Trail 34 requires a mains quality AC
power source for correct operation. If you decide to
supply power using a generator you must consult the
generator supplier to confirm suitability and sizing of
the generator for your application.
Please note that damages caused by the use of a
generator are not within warranty scope.
12. FAN key
13. SLEEP key
14. SET TIME key
15. HOUR/MIN key
16. TIMER key
17. DISPLAY key
18. LIGHT key (Available only
19. Up/Down keys
20. ON/OFF key
21. °C/°F key
Selects Low/Medium/
High or AUTO fan speed.
AUTO fan speed is only
possible in COOL/HEAT
mode. With AUTO fan
speed the fan automat-
ically adjusts between
Low, Medium and High.
Selects the sleep mode.
Only available in COOL or
HEAT mode.
Enters CLOCK/TIMER
setting mode.
Changes between hour
or minutes settings.
Activates different timer
settings.
Switches the display of
the air distributor On/Off.
for units with lights)
Switches the LED lights
on the air distributor On/
Off.
Adjusts the set point
temperature, clock or
timer.
Switches the system On/
Off.
Selects the temperature
units, Celcius or Fahren-
heit, of the temperature
display.
14