Lutron PHPM-PA-DV-WH Manual De Instrucciones página 10

Wiring
(continued)
Dual-Feed Wiring: (Control 120 – 277 V~, Load 120 – 277 V~)
The load breaker can be on a different phase than the control breaker. Both breakers must be turned OFF
prior to installing or servicing the module.
Phase-Adaptive Module
Circuit breaker
L/H
N
Load
wiring 1
1 Load feed: 120 V~ for PHPM-PA-120-WH or PHPM-3F-120-WH
120 or 277 V~ for PHPM-PA-DV-WH, PHPM-3F-DV-WH, PHPM-SW-DV-WH, or PHPM-PA-277/DV
2 Control feed: 220–277 V~ for PHPM-PA-277/DV; 120 V~ for others
Legend
L/H Line/Hot
N Neutral
SH Switched Hot
DH Dimmed Hot
Ground
Not Used
10 Power Modules
Load (dimmed)
DH1 SH1 H1 DH2 SH2 H2 DH3 SH3 H3
(1) 14 AWG to 10 AWG
2 2
(2.0 mm to 4.0 mm )
Dimmed Hot
L/H
Zone In
N
Control Neutral
DH
GP3 panel shown
N
Control
wiring
(1) 14 AWG to 10 AWG
2 2
(2.0 mm to 4.0 mm )
Neutral
Control
wiring to
circuit
selector
Branch
circuit
breakers
2