English - Parrot UNIKA Guía De Instalación Rápida

UNIKA is a universal interface that allows you to control the Parrot MKi / RKi / ASTEROID
directly with the OEM steering wheel commands. UNIKA can work with car protocols such
as CAN, K-BUS or resistive systems.
Warning : We advise our customers to have the Parrot system fitted by a professional.
► Refer to the installation diagrams p.4 to 8. For more information, refer to the Installation
section of our website www.parrot.com.
Installation
of the Parrot
MKi / RKi /
ASTEROID
Selecting the
protocol
Installing the
UNIKA with a
Parrot MKi
10
• We recommend you to install the Parrot MKi / RKi / ASTEROID
before installing the UNIKA.
• Make sure the installation is correctly performed by checking if the
«Good bye» message is displayed when you turn off the ignition.
► Refer to the documentation of your Parrot MKi / RKi / ASTEROID
for more information.
Use the DIP switches on the UNIKA as indicated on the diagrams p.8
to select the protocol (resistive or CAN Bus / K-BUS) on which the vehicle
is based.
► If you do not know on which protocol your vehicle is based, refer to the
installation section of our website.
Warning: Make sure the Parrot UNIKA is not powered before selecting
the protocol.
Install the UNIKA interface between the Parrot MKi electronic box and the
vehicle wiring as described on the diagrams p.4 / 6.
Warning : Connect the ignition to the Parrot car kit if the vehicle is
based on a resistive or a K-Bus protocol. Don't connect the ignition
if the vehicle is based on a CAN protocol as this signal is supplied by
the Parrot UNIKA.

English

Installation