Heatworks 1X Manual Del Usuario página 13

8) The display will now read "15" amps.
9) Press the up and down buttons to select your desired
maximum amperage. Amperage can be selected in 5 amp
increments from 15-48 amps. Note: Set current to
match your hot water electrical circuit rating.
10) Press and release both buttons simultaneously to
save the new setting.
11) Digital display will now read the default temperature
setting of "115" °F.
YOU ARE NOW READY TO ADJUST THE TEMPERATURE
Please continue to page 12
www.myheatworks.com
CAUTION: Breaker must remain off until installation is complete.
11