HP Designjet HD Pro Manual Preliminar página 4

5. If you see a Calibrate RIP
6. Select the paper type that you have loaded in the printer.
7. When you are warned that no media profile exists for that paper type, press OK.
8. Press the Print Color Sheet
which you can discard, before printing the color sheet.
9. Press the Scan Sheet
10. Load the color sheet into the scanner. Align the arrow on the color sheet with the arrow on the center of the scanner.
11. Press the OK button to start the scan.
12. When you see a message confirming that the media profile has been created, press OK.
Make copies
1. If you do not already have a media profile for the paper type you are planning to use, you must create one. See the
preceding section.
2. Insert your document.
a. Place the document with the top edge forward in the scanner insertion slot. Align the right edge of the document
with the right edge of the insertion slot.
b. Adjust the left paper guide to the paper width so that the paper is aligned as it feeds into the scanner.
3. Select color or black-and-white copying.
Your selection determines which type-of-original templates are available in the following step.
4. Select the type-of-original template.
a. Select the Copy
b. Press the Type of Original
c. Select a type-of-original template that best describes your current input.
d. If you want to change the settings for any of these options, or want to create a new option, press the Tool button.
To save the new configuration, press the
If you change any of the original template settings, the Type of Original dialog box shows the symbol "*" next to
the template name to denote that changes have been made. For example, changes made to the CAD template
appear in the dialog box as "CAD*".
5. Select the scan and print quality.
a. In the Copy tab, press the
b. Select the print quality, which may be Fast,
c. Choose among various scan-quality options:
• Set the scan resolution, or select Auto. If you select Auto, a suitable scan resolution is chosen automatically,
taking the print resolution into consideration; and the chosen scan resolution is displayed.
• Select Descreen
• Select Turbo
dpi.
5. Select the input size.
a. Select the Copy
b. Press the Input size
c. Select the size that fits your original. Select
of the original.
d. If you want to change the settings for any of these options, or want to create a custom-paper size, press the
button. To save the changes or the custom-paper size, press the
Introductory Information
5
button and would like to use it, refer to the online help.
button to print a color patch reference sheet. Some printers print a special test sheet,
button to scan the color sheet.
tab.
button. The Type of Original dialog box appears.
Quality button.
to increase print quality but reduce scanning speed.
to increase scanning speed but reduce print quality. It has no effect at resolutions below 300
tab.
button. The Input size dialog box appears.
New button and enter a name for it.
Normal or Best.
Auto to have the scanner automatically detect the width and length
New button and enter a name for it.
Tool