Arregui PUCK CE 2032+U Manual De Instrucciones página 9

PUCK CE2032+U_EN
OPENING CODES
This lock allows you to program opening codes from 4 to 15 digits.
Initial user code: 1234
Initial master code: 4321
For your safety, it is important that you change them and set new opening
codes.
OPENING
OPENING WITH USER CODE: Enter the user code and press OK. For a
FIRST OPENING, use the initial user code (1234).
OPENING WITH MASTER CODE (in those cases where the user code has
been misplaced): Enter the master code (initial, 4321) and press OK.
Important: When using the master code, the user code is initialised to
1234.
CHANGE OF OPENING CODE
•Enter the user code and press OK.
•Press OK again until the green light flashes. Then enter the new user
code and press OK.
CHANGE OF MASTER CODE:
•Enter the master code and press OK.
•Press OK again until the green light flashes. Then enter the new master
code and press OK.
9