Picture Menu - npg NLD227B-P Manual De Usuario

•Auto Search
Select the【 】button to start auto search . Once the
progress bar is full, the found channels will be stored
and the unit will proceed to the search for TV, DTV,
Radio. If you pr ess M ENU button in TV searching ,
the Auto Searching will skip to DTV searching as the
suggestive picture shows.
•Manual Search
Mannul search option allows you to preset programs
one by one. The first Source Sel. is TV, the other
one is DTV.The display that you are searching
program on screen. Press red button to save your
choice of program.
Source Sel.: Two modes to select:TV, DTV.
Current CH: To display the current physics
channel .number.
Frequency: To display the frequency of the
searching program.
Search: To decrease and increase frequency you
want. (In TV mode)
Fine: To little adjust the frequency (In TV mode).
After adjustment, the current channel number
changes yellow.
NOTE: In DTV mode, when highlighting Current CH
or Frequency, the TV begin DTV Manual Search.
•Skip
Skip the current program. When setting the program skip as on, 【CH+/CH-】 button
cannot select it. But you can select the skipped program by pressing the number
buttons directly. After adjustment, the current channel number changes to red.
Press MENU button on the TV set or on the remote control to select the Picture menu.
Shown as below:
Picture mode
Select the Picture mode.
The manufacture's recommendation mode is HOME.
•Contrast / Brightness
Press【 】/【 】button to adjust the contrast /
brightness of the picture.
•Saturation
Press 【 】 / 【 】 button to adjust the colour saturation.

Picture Menu

12