Publicidad
Quanti-Tray
English
Introduction
IDEXX Quanti-Tray*/2000 is designed to give quantitated bacterial counts of 100 mL samples using IDEXX reagent products. Add the
reagent/sample mixture to a Quanti-Tray/2000, seal it in a Quanti-Tray* Sealer and incubate per the reagent instructions. Count the
number of positive large and small wells and use the Most Probable Number (MPN) Table attached to determine the MPN.
Contents
This package contains sterile Quanti-Tray/2000 trays.
User Instructions
1. Use one hand to hold a
Quanti-Tray* upright with the
well side facing the palm.
4. Pour the reagent/sample mixture
directly into the Quanti-Tray, avoiding
contact with the foil tab. Tap the small
wells 2–3 times to release any air
bubbles. Allow foam to settle.
For technical support, please call:
North/South America: +1 207 556 4496 or 1 800 321 0207
Europe: +00800 4339 9111
UK: +44 01638 676800
China: +86 21 61279528
Japan: +81 422 71 5921
Australia: +1800 443 399
idexx.com/water
Download the IDEXX MPN generator software for automated Quanti-Tray results at idexx.com/mpngenerator.
†
* Quanti-Tray is a trademark or registered trademark of IDEXX Laboratories, Inc. in the United States and/or other countries.
© 2013 IDEXX Laboratories, Inc. All rights reserved.
/2000
*
2. Squeeze the upper part of the
Quanti-Tray so that the Quanti-Tray
bends toward the palm.
5. Place the sample-filled Quanti-Tray
onto the Quanti-Tray/2000 rubber
insert of the Quanti-Tray Sealer
with the well side (plastic) of the
Quanti-Tray facing down.
3. Gently pull foil tab to separate the
foil from the tray. Avoid touching the
inside of the foil or tray.
6. Seal according to the Quanti-Tray
Sealer instructions.
7. Incubate according to reagent
instructions.
8. Count large and small positive wells
and refer to the Quanti-Tray/2000 MPN
table to find the MPN.
†
9. Dispose of media in accordance with
good laboratory practices.
Westbrook, Maine 04092 USA
One IDEXX Drive
Publicidad
