Hinkley ARTISTE Manual De Instrucciones página 12

INSTALLING THE BLADES
Flat washers
Lock washers
10 | hinkley.com
Fasten blade to motor with provided flat washers, lock washers
and blade mounting screws. Repeat procedure for remaining
blades. Make sure screws are TIGHT! Loose motor screws can
contribute to unnecessary hum during operation.
Blades
Screws
NOTE:
Cordless power screwdrivers are NOT
as they usually strip the heads of the screws and
usually will not fully compress the lock washers on
the motor screws. Use a large flat blade screwdriver
for final tightening to fully compress the washers. This
will help ensure proper alignment of the blades and
noise-free, wobble-free running.
recommended,