Roadstar TTR-8632UCEN Manual De Instrucciones página 6

REPEAT/INTRO/RANDOM MODE(BY REMOTE CONTROL)
Press the Repeat/Intro/Random button (4) on the remote control before or during playback,
a single track, single folder (MP3 only) or all the tracks can be played in different mode as
follows:
FOR MP3/WMA
(1) REPEAT 1 (2) REPEAT ALL TRACK
(6) OFF MODE (5) RANDOM
INDICATOR
PLAY MODE ON LCD DISPLAY
REPEAT SINGLE TRACK
REPEAT ALL TRACKS
REPEAT SINGLE FOLDER
INTRO PLAY MODE INTRO
RANDOM MODE RANDOM
OFF MODE ------------
 Repeat play
You can listen the desired tracks or folder repeatedly by this function.
 Intro play
You can listen the beginning (10 seconds) of each track in a cd by this function & saving
your time to search the desire song
 Random play
You can listen all the tracks or folder in a random order by this function
English
(3) REPEAT ONE FOLDER
(4) INTRO PLAY
ALL
English
7 856
USB/SD PROGRAMMING (BY REMOTE CONTROL)
Up to 32 tracks can be programmed for MP3 file and play in any order. before use, be sure
the system is at stop mode before programming:
1. Set in USB mode with the Source button (10).
2. Press the "PROGRAM " button (5), " PROG " will appear on LCD display. Moreover, it
will indicate program no. and digits for track no. to be programmed.
3. Select a desired track by pressing SKIP
4. Press the " program " button to store the trace into memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
6. When all the desired tracks have been programmed, press " PLAY/PAUSE "
(6) to play the disc in assigned order.
7. To cancel the programmed file, press "STOP" button on remote handset until " PROG
" is disappear on LCD display (2).
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA OR MEMORY
CARD CONNECTING
The system is able to decode and playback all MP3 /WMA file which stored in the memory
media with USB connecting port or SD/MMC memory card.
1. Set Function selector (7) at USB mode and then press SOURCE button (10) to select
" USB or CARD" mode.
2. Plug-in the USB plug with the face up & make sure it going into completely or insert
the memory card in the direction of the arrow as shown in the label on the underside
of the MEMORY CARD slot cover. Insert straight without bending.

Connecting the USB upside down or backwards could damage the audio system or
the storage media (usb thumb drive / sd/mmc card). Check to be sure the direction is
correct before connection.
3. The system will start reading the storage media automatically after connecting, and
LCD display (2) will show the total number of MP3/WMA files and total number of
folder being detected.
REMARK
- The system can detect and read the file under mp3
and wma format only though the usb port.
If connect the system to MP3 player via the usb
-
socket, due to variances in MP3 encoding format,
some mp3 player may not be able to play via the
usb socket. this is not a maul-function of the
system.
or buttons (7).
button