Roadstar TTR-8632UCEN Manual De Instrucciones página 7

ENCODING OF PHONO INTO MP3 FILE
The system is able to ENCODE music from TURNTABLE to MP3 format and recording at
memory media with USB connecting port.
REMARK:
- The recording speed is 1:1 and according to the actual plying time of the track
- The system will creat a " AUDIO " folder and then store the encoding track in it.
- The recording format is preset at – MP3 bit rate : 128 kbps, sampling rate : 44.1khz
- No song title will be recorded during encoding mode
- To interrupt the recroding, press the " RECORD " button again during record mode.
Recording will be completed only entire song being encoded, if terminate the
-
encoding process intermediately, there is no track being recorded nor stored to
the USB or SD/MMC card.
COPYING OF MP3/WMA FILE FROM USB TO MMC
By pressing the " RECORD " button (3) the system will copy the files from to the USB to the
MMC card, and the system will switch to copying mode only if MP3/WMA file is being read.
REMARK:
- The system will store the file to USB source first if both USB and SD slot are being
occuplied by storage media.
- If press the " Record " button during playback of USB or SD source, the file will copy
from USB to SD or SD to USB.
A) PHONO ENCODING
1) Set the Function button to " PHONO " mode and then press the " RECORD " button (3)
directly.
2) The LCD display with show the word "
" & " " and flashing after few seconds. Now the system is starting the
encoding mode.
3) Start playback at PHONO for the track which you want to record to USB.
4) After finishing of recoding, press and hold the " RECORD " button (3) until the LCD
stops flashing and returns to " PHONO " mode.
English
USB
" and then flashing, and then display "
English
9 10
B) ENCODING BITRATE (BY REMOTE HANDSET)
You can select the desired BITRATE during ENCODING from PHONO to USB, the selectable
range from 32 / 64 /96 /128 / 192 / 256 Kbps.
1) Set in " PHONO " function (7) & remain in stop mode.
2) Press the " INFO " function and the LCD display will show the default bitrate (128
Kbps)
3) Press skip or
4) Press again the " INFO " to confirm the setting and the lcd display (2) resume to "
phono " mode
REMOVING OF USB / MEMORY CARD
To remove the USB / MEMORY CARD, turn off the power or switch the function mode to
either AUX or TUNER first. For USB port – un-plug it by pulling out the USB socket directly,
for memory card – press the memory card inward & then release, now the card being
partially eject and you can remove it by hand.
LINE OUT CONNECTION
You can connect the system to your home Hi-fi system by connecting the LINE OUT socket
(27) to the auxiliary input socket with a RCA cable (not included).
SPECIFICATIONS
Power Supply
AC:
RC Battery:
Radio Frequency Coverage
FM:
MW:
Power output
Design and specifications are subject to change without notice.
buttons (7) to select the desired bitrate for encoding.
230V ~ 50Hz
2 x AAA (UM-4) 1.5V (not included)
87.5 - 108MHz
522 - 1620kHz
2 x 2 W RMS (10% THD)