Setting Date/Time - Velleman DRT1 Manual Del Usuario

6. Batteries
Do not puncture batteries or throw them in fire as
they may explode. Do not attempt to recharge non-
batteries in accordance with local regulations. Keep
1. Open the battery compartment at the bottom of the device.
2. Insert the batteries in accordance to the polarity markings.
3. Close the battery compartment.
7. Installation

7.1 Setting Date/Time

After battery installation, the LCD displays the year.
1. Turn the dial to select the digit.
2. Press BOOST/OK to confirm and set the next digit.
3. Set the month, day, hour and minutes.
7.2 Mounting
1. Unscrew the original thermostat unit from the valve.
2. Select the suitable adapter (Danfoss RA, RAV or RAVL) if necessary
and screw onto the valve.
3. Screw the digital thermostat onto the valve and tighten.
7.3 Test Run
After installation, the device will go into test mode. If the thermostat has
been installed correctly, the display will show
V. 01 – 22/06/2016
rechargeable batteries (alkaline). Dispose of
batteries away from children.
DRT1
WARNING
6 ©Velleman nv