Remote Control; Shortcut Function - Danby DPA120B8WDB-6 Manual Del Propietário

OPERATING INSTRUCTIONS

REMOTE CONTROL

1. Power button: Press to turn the appliance on or
off.
2. Mode button: Press to select the desired mode.
3. Fan button: Press to select fan speed.
4. Ionizer button: Press to activate the ionizer.
5. Sleep button: Press to start the sleep feature.
6. Swing button: Press to start the auto swing
feature. When auto swing is activated, press
again to stop the louver at the desired angle.
7. Follow me button: Press to activate the follow
me feature.
8. LED button: Press to turn the LED display on or
off.
9. Timer off button: Press to set the automatic off
timer.
10. Timer on button: Press to set the automatic on
timer.
11. Shortcut button: Press to set and activate the
short cut function.
12. Up and down buttons:
• Used to set the temperature.
• Press and hold both up and down buttons for 3
seconds to change the temperature display from
°C to °F.
13. LED display:
• Shows the set temperature in °C or °F or the
auto-timer settings.
• While on dry or fan mode it shows the room
temperature.
• Shows whether the follow me function is active.
1
2
3
4
5 6 7 8

Shortcut function

• Used to save a favourite setting.
• Set the appliance to the temperature and fan
speed that you would like to set as a favourite.
• Press and hold the shortcut button for 2 seconds.
• Press the shortcut button at any point in future to
return to the favourite setting.
• If no favourite is set, pressing the shortcut button
will cause the appliance to run in auto mode at
29°C (79°F), with fan speed set to auto.
9
13
11
12
10
9
(only available on remote):