Control Panel; Remote Control; Led Display - Danby DPA100EAUWDB Manual Del Propietário

OPERATING INSTRUCTIONS

CONTROL PANEL

1. Fan Button: Press to select fan speed; low,
medium, high.
2. Mode Button: Press to select the desired mode.
Modes will cycle in sequence with each press of
the button; cool, dry, fan.
3. Power Button: Press to turn the appliance on or
off.
4. Up and Down Buttons:
• Used to adjust the set temperature in 1°
increments.
• Press and hold both up and down buttons for 3
seconds to change the temperature display from
°C to °F.
3

LED DISPLAY

1. Temperature and Timer Display: Shows the set
temperature of the timer setting.
2. Temperature Scale: Indicates whether the
temperature scale is set to °C or °F.
3. Timer Indicator: Illuminates if the timer is
activated.
4. Fan Speed Display: Shows the current fan speed
setting; low, med, high.
5. Mode Display: Shows the current mode; cool,
dry, fan.
1
1 2
4
2
3
5 4

REMOTE CONTROL

1. Fan Button: Press to select fan speed; low,
medium, high.
2. Swing Button: Press to start the auto swing
feature. When auto swing is activated, press
again to stop the louver at the desired angle.
3. Sleep: Press to start the sleep function.
4. Up and Down Buttons: Used to set the
temperature and timer.
5. Power Button: Press to turn the appliance on or
off.
6. Mode Button: Press to select the desired mode.
Modes will cycle in sequence with each press of
the button; cool, dry, fan.
7. Timer Button: Press to set the timer function.
8. °C/°F Button: Press to change the temperature
display from °C to °F.
1
2
3
7
6
4
7
5
8