Sauder Dresser Manual Del Usuario página 17

Step 12
1
D132
Groove
Insert the DRAWER SIDES (D132 and D138) at
å
an angle into the slot at each end of the RIGHT
DRAWER FRONT (Q2).
3
M65
Surface with
HIDDEN CAM
Fasten the DRAWER BRACE (M65) to the
å
DRAWER FRONT (Q2). Tighten one HIDDEN CAM.
www.sauder.com/services
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
D138
Q2
1
2
Q2
VIEW THE T-LOCK BOX VIDEO
2
U n
s u
D132
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (D975) into the grooves
å
in the DRAWER SIDES (D132 and D138) and RIGHT
DRAWER FRONT (Q2).
4
D167
D132
M65
Fasten the DRAWER BACK (D167) to the DRAWER SIDES (D132
å
and D138) and DRAWER BRACE (M65). Use five BLACK 1-9/16"
FLAT HEAD SCREWS (30S). Repeat this step for the other DRAWERS
using the DRAWER FRONTS (Q2 and R2). Use the SMALL DRAWER
FRONTS (K2 and L2), SMALL DRAWER SIDES (D10 and D11), and
SMALL DRAWER BACKS (D166) for the small drawers.
410287
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
fi n
i s h
r f a
e d
c e
D975
D138
Q2
Start each screw a few turns before
completely tightening any of them.
30S
BLACK 1-9/16" FLAT HEAD SCREW
(30 used in this step)
D138
Page 17